Multi-format RFID reader ENTERCAM® Mifare 13.56 MHz + EM-Marine 125 kHz for cards, wristbands and key fobs. The ENTERCAM® Wiegand reader controls access to the room. The compact plastic case of the ENTERCAM® Mifare + EM-Marine reader allows it to be placed on a vertical surface outside or inside a building.
Specifications
- Sizes:
- 110*48*20 mm
- Color:
- black matte
- Material:
- ABS matte
- Weight:
- 100 g
- Connection:
- Wiegand
- Wire length:
- 0.15 m
Details
The ENTERCAM® Wiegand reader is used to read contactless RFIDs and provides the user with instant access to the premises.
It operates in a secure and non-secure mode, that is, it can receive a signal from high-frequency and low-frequency RFID tags. The operation of the device is accompanied by sound and light indication. The desired configuration is set using the dedicated ENTERCAM® driver.
The device stably reads RFID identifiers at a distance of up to 10 cm. The reader is compatible with any access controllers operating in Wiegand protocols with CRC 26, 34, 42, 58 and Wiegand without CRC 24, 32, 40, 56.
Wiegand mode uses sound and light indication. The reader can work with most identifiers in secure and non-secure mode. Required parameters official website entercam.ru and use the ENTERCAM USB reader.
Wiegand operating modes with CRC 26, 34, 42, 58 and Wiegand without CRC 24, 32, 40, 56, 1WIRE are possible. The reading format is configured by the master card.
No master card is required to switch to 1WIRE mode. For data exchange, only one DATA 1 wire will be used here. The transition to 1WIRE mode is accompanied by a sound signal. (ONE BEEP = WIEGAND; TWO BEEPS = 1WIRE ).
- ENTERCAM Wiegand Reader
- Wire for connecting the reader to the computer
- Product passport
To work with the reader you need:
- determine a height convenient for the user and fix the reader on the surface
- connect the reader using the Wiegand connector
- download the driver from the official website entercam.ru
- using the driver, set the reading formats, issue and write identifiers
- you can change the settings using the ENTERCAM USB reader, writing the necessary settings to the master card for further ENTERCAM Wiegand settings
Using the driver, you can set the reading formats, issue and write identifiers. The master card is also recorded thanks to the driver. You can download it on the website - entercam.ru or using a QR code.
- Mifare Classic
- Mifare ID
- SMARTTAG
- Mifare Plus
- Mifare Plus SL3 and SL1 secure mode with AES128 encryption
- Em-Marine
- CIPURSE
- Crypto 1
The software allows you to protect CIPURSE IDs from forgery and copying thanks to secure ENTERCAM® technology
It is possible to place an individual full-color design and logo on the front panel of the reader
Sound and light, flexible setting of light indication states.
Drivers and software were developed by ENTERCAM®, it is possible to modify the software for the client's tasks. It works at two frequencies: 13.56 MHz and 125 kHz.
36 months